4 OF October 2017 Acclaim Lighting Introduces Universal Dimming Module

Los Angeles (October 17, 2017) Acclaim Lighting, a leader in innovative and advanced lighting technology, unveils the Universal Dimming Module (UDM), a multi-protocol driver designed to allow conversions between popular control protocols that allow for maximum control flexibility and integration with fixtures. 

The UDM inputs are DMX and 0-10V, while its outputs are DMX, 0-10V and IGBT digital line voltage dimming. Operating with 0-10V Sink Power, the unit can deliver an output of 25ma drive current. Mode setting can be achieved by utilizing the on-board dip switch or RDM. The module can intake a voltage of 1000 watts at 120VAC or 2000 watts at 240VAC, while outputting 100-277VAC or 50/60 Hz via TRIAC. AC options include 90-277AC pass through while using DMX to allow power output to fixtures.  

Featuring eight- and 16-bit dimming, the unit hosts one input and one output via ½-inch conduit nipples. In addition, the IP66-rated UDM operates in temperatures ranging from -31 to 122 degrees Fahrenheit and in wet locations. Its aluminum housing ensures that neither dust nor water will harm the unit. In addition, the UDM has transient voltage protection and DMX isolation. It’s available in black and carries a five-year limited warranty. For more information about the UDM, contact Acclaim Lighting at 323-213-4626 or visit www.acclaimlighting.com

Contact: Brian Bloom

Falls Communications

bbloom@fallscommunications.com

216-696-0229