Flex Tape Flex Pro Exterior




Flex Pro Exterior is a high output, low voltage, exterior rated LED circuit strip in a 16.4’ spool. It can be cut every two inches to create the exact length needed for your specific application. It is available in 2700K, 3000K, & 4000K, is 5.5W per foot on average, and features a lumen output of 550 per foot (@ 4000K). The combination of it’s high output and low profile allows for a wide variety of cove, millwork, signage, and many other exterior applications.


Color Temperature2700K, 3000K, 4000K
Spool Length + Cut Points16.4' (5m), Cut points every 2" (50mm)
Beam Angle120º
Max Fixtures Runs16.4‘ (5m) - 1 spool maximum
Photometrics550 total lumens, 87 CRI (4000K LM-79, 1‘ section tested)
Dimming ProtocolSymmetric forward phase control (MLV) or DMX
Mounting 10 plastic mounting clips, optional aluminum channels
Power Consumption100W @ 16.4‘ (1 Spool), minimum 6.1W per foot
Operating Voltage24VDC
Lumen MaintenanceL70 @ 50,000 Hours (25º C)
Housing MaterialCopper strip
Operating Temperature-40°F to 122°F (-40°C to 50°C)
IP RatingIP68, Wet Location / Submersible
Fixture Connectors3.28' (1m) Attached feed cable included
Warranty3 Years
DimensionsW 0.6” x H 0.2” x L 16.4’ (15.4 x 5 x 5000mm)
Weight1 lbs (0.5 kg)
CertificationscETLus, CE