LED DRIVERS & PSU'S

X-CHIP DRIVERS

X-CHIP DRIVER PCB

X-Chip Driver PCB is designed for use with X-Chip 100 or 300 series and can operate up to 400pcs (120pcs on 6.5A PSU). Driver features 8 outputs which can take up to 50 Chips per output and has a DMX input and 24v input (up to 20A). PCB comes with a plastic mounting clip and 8 x 1M flat first cables to X-Chip. Use XBR1 to set up DMX start address or set internal program and use with 24vDC 6.5A PSU.

X-CHIP DRIVER IN CASE

X-Chip Driver in case is the same as above but in a moutable case with electrical knockouts for easy installation and hard wiring. Use XBR1 to set up DMX start address or set internal program and use with 24vDC 6.5A PSU.  

X-POWER TV

Designed for operating X-Chip 100 and 300 series this unit features DMX 3pin XLR inputs 8 x 5pin XLR outputs to combine power/data control of the X-Chips on each output cable and drives up to 120 X-Chips with up to 50 pcs per output. Also features flicker free opertaion ideal for TV / Video applications. Use XBR1 to set up DMX start address or set internal program. Power supply built in - switchable 115-240v.

X-CHIP DRIVER IR
  
Designed for simple installs with basic control requirements, the X-Chip driver IR features the same at the X-Chip driver but has built in DIP switches for DMX and Mode asssignment, you don't need the XBR1 set up controller. Also, as an added feature, an IR remote and Infrared EYE sensor is includes for manual wireless control of built in programs and effects. Use with 24vDC 6.5A PSU.

X-DRIVER 4


X-Driver 4 is designed for X-Chip W12 and X-Eye 5mm plus will work with most lower power LED's including our X-Chip W12 series and other 1W LED products. Features 8 terminal outputs and comes standard with 24V dc 6.5A internal power supply but is also available with 12v DC internal power supply.
X-POWER-HP

Designed for driving 1W LED fixtures like the X-Eye HP, X-Bar HP and Inground Light the X-Power HP has 6 outputs and features DMX and built in control.

RAY CONTROL DRIVER

Designed for driving 350ma 1W LED fixtures like the Inground Lite and features built in 150w power supply, 6 outputs both terminal and RJ45 as well as DMX and manual program settings.

X-DIMMER-1



The X-Dimmer-1 is a simple single channel LED driver that allows you to dim LED's from DMX or Manual control.
Ideal for use with our X-Chip W12 LED PCB's this is a low cost LED driver for many of applications.

ED-1W

An in line LED driver for use with 1W LED products...this unit can be used with our X-Chip driver series inline and power our 1W high power LED fixtures like the X-Eye HP and X-Bar HP.

X-BUBBLE / DOT DRIVERS


X-BUBBLE / DOT DRIVER IR

The X-Bubble / Dot Driver IR is a combination of a control interface and driver for our X-BUBBLE-LED PCB modules. A maximum of 48 channels can be controlled separately allowing a maximum of 48pcs X-BUBBLE LED PCB modules to be driven by connecting to 48 output ports, or a maximum of 16pcs X-BUBBLE-4RGB in connecting to 16 terminal ports.

SWITCHING POWER SUPPLIES
Indoor

The S-150-24 by Meanwell is the most relaible affordable power supply on the market. UL approved it offers swithable input from 115 to 240v and has dual outputs of 24vDC up to 6.5A total of 150W. Also available is the S-150-12 which is a 12vDC output 10A power supply for use with 12V DC led drivers or S-150-9 and S-150-15.

Outdoor

The CLG-100-24 by Meanwell is an IP 67 Class 2 UL approved rated power supply offering 4A (100w @
24vDC) and is auto switching input power input 100-204v. This unit is tested to drive any of our 24V DC products and can be used in outdoor applications.
 
RAY POWER

RAY POWER is basically a data / power supply distribution box. With a built in internal switching power supply from input of 115-240v and outputs 24v DC combining the power with the DMX input and splitting the signal to the 4 5pin XLR outputs. For use with Color Ray, Grass Light and can also be used with X-BAR or really any 24v DC LED fixture with DMX control.

X-PD-150


X-PD-150 is bascially a data / power junction box designed for use with the X-Panel and X-Curtain systems but can also be used for the X-Bar and any other 24v DC fixture that takes DMX control. The unit features a DMX input - power in as well as a power out plug to link multiple boxes together.


X-IMAGE DRIVER 


X IMAGE DRIVER is designed for use with DMX LED RGB Video pixel products and controlled via our proprietary X-Software PC mapping and media player software. It is the most economical way to control 1,000's of DMX controlled pixels.

X-NET 8

X-NET 8 is a artnet to dmx node providing 8 universes of DMX ouptut, ethernet (artnet) in as well as DMX input trigger control. It is designed for use with any artnet DMX controller ideal for large scale RGB pixel installations. An optional PC software application called X-Soft NET allows uploading of media content and trigger via dmx or internal time clock.

X-NET 12

X-NET 12 is a hybrid product providing internal power supplies and data processin of 12 DMX univers of DMX 512 or DMX1000k protocol and 24v dc through one connector. For use with our X-Software mapping and media player PC software.

X-IMAGE PRO 36

X-Image Pro 36 offers up to 36 DMX 512 or DMX 1000k outputs using control from ethernet via X-Software mapping and media PC player software.

CABLES AND CONNECTORS
Click here for more information on the cables and connectors we offer